A Modified Thermal Decomposition Approach for The Synthesis of Phase-Pure YBa₂Cu₃O₇−δ Superconductor
DOI:
10.56566/jmsr.v2i1.694Downloads
Abstract
High temperature superconductor of YBa2Cu3O7-δ (Y-123) has been synthesised using the modified thermal decomposition method (MTD). In this work, a pure Y-123 sample is produced using an acetate-based material as a precursor and sintered at 980 oC. The study on the phase formation, superconducting properties and microstructural characteristics of pure Y-123 was investigated using X-ray diffraction (XRD), four-point probe (4PP) and scanning electron microscopy (SEM) respectively. XRD analysis confirmed the formation of a single-phase orthorhombic Y-123 crystal structure with an orthorhombicity of 0.008, indicating high phase purity without detectable impurity phases. Electrical measurements revealed a sharp superconducting transition with a critical onset temperature, Tc-onset of 97.3. SEM observations showed plate-like grains with an average grain size of 2.25 µm and good grain connectivity. These results demonstrate that the modified thermal decomposition technique is an effective approach for producing phase-pure YBCO superconductors with excellent structural and superconducting properties, highlighting its potential for advanced superconducting applications
Keywords:
Superconductor Thermal Decomposition Method YBCOReferences
Abdul Hussein, A. A., Abdul Hussein, A. M., & Hasan, N. A. (2023). Study of the properties of YBCO superconductor compound in various preparation methods: a short review. Journal of Applied Sciences and Nanotechnology, 3(1), 65–79. Retrieved from https://jasn.uotechnology.edu.iq/article_22901.html
Akhtar, M. J. (2011). 100 Years of Superconductivity (1911-2011). The Nucleus, 48(4), 261–268. Retrieved from http://www.thenucleuspak.org.pk/index.php/Nucleus/article/download/818/485
Arebat, R. A. M., Kechik, M. M. A., Baqiah, H., Kien, C. S., Pah, L. K., Shariff, K. K. M., Shaari, A. H., Hong, Y. S., Sah, N. A. M. I. A., & Miryala, M. (2025). Impact of calcination temperature on the microstructure and superconductivity of YBa2Cu3O7- $δ$ ceramic prepared via modified thermal decomposition method. Journal of the Australian Ceramic Society, 61(4), 1375–1386. https://doi.org/10.1007/s41779-025-01172-5
Arebat, R. A. M., Kechik, M. M. A., Hong, Y. S., Kien, C. S., Pah, L. K., Baqiah, H., Barood, F., Humaidi, S., Peh, H. K., Shaari, A. H., & others. (2025). Sm2O3-induced superconductivity enhancements in bulk Y-123 ceramics synthesized via a novel modified thermal decomposition method. Journal of Materials Research and Technology, 36, 9168–9181. https://doi.org/10.1016/j.jmrt.2025.05.065
Arsénio Costa, A. J., & Morais, H. (2024). Power quality control using superconducting magnetic energy storage in power systems with high penetration of renewables: a review of systems and applications. Energies, 17(23), 6028. https://doi.org/10.3390/en17236028
Deng, Z., Wang, L., Li, H., Li, J., Wang, H., & Yu, J. (2021). Dynamic studies of the HTS maglev transit system. IEEE Transactions on Applied Superconductivity, 31(5), 1–5. https://doi.org/10.1109/TASC.2021.3052452
Dihom, M. M., Shaari, A. H., Baqiah, H., Al-Hada, N. M., Kien, C. S., Azis, R. S., Kechik, M. M. A., Talib, Z. A., & Abd-Shukor, R. (2017). Microstructure and superconducting properties of Ca substituted Y (Ba1− xCax) 2Cu3O7− δ ceramics prepared by thermal treatment method. Results in Physics, 7, 407–412. https://doi.org/10.1016/j.rinp.2016.11.067
Düzgün, İ. (2025). Limitations of conversion factor approaches in the synthesis of complex oxide superconductors: a case study on Y123 and Y358. Gümüşhane University Journal of Science and Technology, 15(4), 1282–1290. https://doi.org/10.17714/gumusfenbil.1786375
Dzul-Kifli, N. A. C., Kechik, M. M. A., Baqiah, H., Shaari, A. H., Lim, K. P., Chen, S. K., Sukor, S. I. A., Shabdin, M. K., Karim, M. K. A., Shariff, K. K. M., & others. (2022). Superconducting properties of YBa2Cu3O7-δ with a multiferroic addition synthesized by a capping agent-aided thermal treatment method. Nanomaterials, 12(22), 3958. https://doi.org/10.3390/nano12223958
Dzul-Kifli, N. A. C., Kechik, M. M. A., Kien, C. S., Lim, K. P., Shaari, A. H., Shabdin, M. K., Yaacob, Y., Zaid, M. H. M., Hong, Y. S., & Hapipi, N. M. (2025). Effect of Oxygen Flow During Sintering on the Structural, Superconducting and Microstructural Properties of YBa2Cu3O7-$δ$. Solid State Science and Technology, 33(2), 161–170. https://doi.org/10.66514/ssst332-149-160
Ezzatpour, S., Sharifzadegan, L., Sarvari, F., & Sedghi, H. (2018). Investigation of Pb doping on electrical, structural and superconducting properties of YBa2-xPbxCu3O7-$δ$ superconductors. Physica C: Superconductivity and Its Applications, 549, 150–153. https://doi.org/10.1016/j.physc.2018.02.023
Hasan, N., Hafeath, H., & Ahmed, A. (2021). Synthesis and characterization of the bulk YBCO-target of superconducting material. Materials Today: Proceedings, 42, 2268–2272. https://doi.org/10.1016/j.matpr.2020.12.314
Kamarudin, A. N., Awang Kechik, M. M., Abdullah, S. N., Baqiah, H., Chen, S. K., Abdul Karim, M. K., Ramli, A., Lim, K. P., Shaari, A. H., Miryala, M., Murakami, M., & Talib, Z. A. (2022). Effect of Graphene Nanoparticles Addition on Superconductivity of YBa2Cu3O7~δ Synthesized via the Thermal Treatment Method. Coatings, 12(1), 91. https://doi.org/10.3390/coatings12010091
Mazaheri, M., Ghasemi, S., & Heidarpour, A. (2015). An Approach to Synthesis a New Superconductor Belonging to the YBCO Family: Y2Ba5Cu7O x. Journal of Superconductivity and Novel Magnetism, 28(9), 2637–2640. https://doi.org/10.1007/s10948-015-3092-8
Miura, A., Bartel, C. J., Goto, Y., Mizuguchi, Y., Moriyoshi, C., Kuroiwa, Y., Wang, Y., Yaguchi, T., Shirai, M., Nagao, M., & others. (2021). Observing and modeling the sequential pairwise reactions that drive solid-state ceramic synthesis. Advanced Materials, 33(24), 2100312. https://doi.org/10.1002/adma.202100312
Monshi, A., Foroughi, M. R., Monshi, M. R., & others. (2012). Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD. World j. Nano Sci. Eng, 2(3), 154–160. https://doi.org/10.4236/wjnse.2012.23020
Onar, K., & Yakinci, M. E. (2015). Solid state synthesis and characterization of bulk $β$-FeSe superconductors. Journal of Alloys and Compounds, 620, 210–216. Retrieved from https://www.sciencedirect.com/science/article/pii/S0925838814021793
Pahlke, P., Sieger, M., Chekhonin, P., Skrotzki, W., Hänisch, J., Usoskin, A., Strömer, J., Schultz, L., & Hühne, R. (2016). Local orientation variations in YBCO films on technical substrates-a combined SEM and EBSD study. IEEE Transactions on Applied Superconductivity, 26(3), 1–5. https://doi.org/10.1109/TASC.2016.2535138
Rizwan, M., Ayub, A., Fatima, S., Ilyas, I., Usman, A., & Shoukat, A. (2022). Fundamentals and properties of superconductors. Materials Research Foundations, 132, 49–78. https://doi.org/10.21741/9781644902110-3
Sah, N. A. M. I. A., Kechik, M. M. A., Kien, C. S., Pah, L. K., Shaari, A. H., Shabdin, M. K., Karim, M. K. A., Miryala, M., Baqiah, H., Shariff, K. K. M., & others. (2024). Comparative studies of pure YBa2Cu3O7-ẟ prepared by modified thermal decomposition method against thermal treatment method. Applied Physics A, 130(5), 340. https://doi.org/10.1007/s00339-024-07412-y Keywords
Sorongane, E. (2023). The classical description of the meissner effect: theory and applications. Open Journal of Applied Sciences, 13, 275–287. https://doi.org/10.4236/ojapps.2023.133022
Xu, Z., Wang, H., Feng, Z., Wu, H., Xiao, J., Chen, Q., Wang, S., Cheng, J., Wang, L., Wang, Y., & others. (2025). Design and simulation of a 7.0 T conduction cooled superconducting magnet. Scientific Reports, 15(1), 15699. https://doi.org/10.1038/s41598-025-00643-w
Yunus, N. E., Azman, N. J., & Jamion, N. (2018). Preparation and characterization of yttrium barium copper oxide (YBCO) superconductorwith addition of cobalt oxide (CO 3 O 4). Journal of Academia, 6(1), 31–38. Retrieved from https://ir.uitm.edu.my/id/eprint/29541/
License
Copyright (c) 2026 Nur Athirah Che Dzul-Kifli, Nurul Zafirah Zakaria, Mohd Mustafa Awang Kechik, Chen Soo Kien, Lim Kean Pah, Abdul Halim Shaari, Muhammad Kashfi Shabdin, Aris Doyan, Yap Siew Hong, Nur Hidayah Mohd Hapipi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Journal of Material Science and Radiation, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC-BY License). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Journal of Material Science and Radiation.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
